REVERSING INTO A BERTH: Singlehanded Docking Stern To with Lazy Lines Watch as Nick, step by step reverses into a berth. This is video 8 in Nicks step by step singlehanded Docking To/With Lazy Lines =========================== Watch the full training video here - https://youtu.be/-OPs960oR88 =========================== Transcript As we approach the dock here I want to get quite close. Now I'm using forward just to stop us from getting back onto the dock itself. As soon as I've lost my forward reverse momentum I stop. If you can throw the line to him like that over his arm then it's not going to hit him in the face. Oh we'll take it back it's okay. Oh okay okay. So you'll get this as well. There's often you will um either get someone who's going to pass the line back to you or he's just going to hitch it there so that you don't have to deal with it straight away. Now if it was a really windy day or if I was getting blown away right now I would drive my boat against that Stern line or control line. So that I had control and was not drifting closer to the dock. =========================== Filmed and Edited by Mahina Hathaway and Nick Hathaway, 45 Degrees Sailing Looking to sail in Croatia? Here are four ways we can help make it happen! ⛵️ ⛵️ Premium Tours ➡︎ ➡︎ https://rb.gy/wrvmtg ⛵️ ⛵️ Flotilla Sailing Weeks ➡︎ ➡︎ https://rb.gy/xozady ⛵️ ⛵️ Bareboat Charters ➡︎ ➡︎ https://rb.gy/yg7l2v ⛵️ ⛵️ Buy a Yacht ➡︎ ➡︎ https://rb.gy/afxrbv =========================== Connect with Us on Social Media: =========================== ➡︎ https://www.linkedin.com/company/45-degrees-sailing/ ➡︎ https://www.facebook.com/45degreessailing ➡︎ https://www.instagram.com/45degreessailing/

0

0

0

15,396

0

0

0

0

607

0

0

0

0

91

Instead of antifouling, we polish our prop to keep it clean and efficient. The process? Scrape off barnacles Dissolve calcium buildup with acid Polish with progressively finer compounds for a smooth finish ✨ Finally, we grease the prop, add a fresh zinc anode, and apply a final coat of Brasso before launch! Note, that this depends on the condition of your propeller. If it’s really fouled or previously painted, you might need a more thorough process - like we did last year. Drop us a comment, and we’ll send you the full how-to list! 🪩 Have you tried this method or want to try it out? Then safe it for later 📨 or do you swear by antifouling? Drop your thoughts below! 💭

0

0

0

14

0

0

0

0

228