0

0

0

0

159

For the best stamp of approval you can't get better than that of Lloyd's Register. A neat finishing touch for each and very Contest yacht. 🔨 #ContestYachts #BuildingDreamsTogether #LloydsRegister

0

0

0

11

Check out the link below for full instructions on how to tie the Highwayman's Hitch. https://youtu.be/USjyE1nTV9Q The Highwayman’s hitch is a quick-release draw hitch used for temporarily securing a load that will need to be released easily and cleanly. The hitch can be untied with a tug of the working end, even when under tension. The highwayman's hitch can be tied in the middle of a rope, and so the working end does not need to be passed around the anchor when tying or releasing. The knot is three bights that each successively lock the previous one: - The first one, in the middle of the rope, wraps around the pole, - The second one (called the toggle bight) is a bight of the standing part locking the first one so the pole is held tight, and - The third one (called the slip-tuck) is a bight of the working part (slack end) locking the second bight. The locking actions are achieved by reaching through each bight to pull the next one through. The knot has to be finished by pulling the standing part tight to ensure that it holds. Until the knot is tightened and properly dressed, the highwayman's hitch has little holding power. The highwayman's hitch is susceptible to capsizing when the pole is substantially larger than the rope diameter. The failure occurs because the second bight sees the force of the standing part, but is held in place by the working part, which has no tension. When capsizing, tension on the standing part pulls the second bight through the first bight. This drags the slip-tuck through, and will release the hitch if the third bight isn't long enough. The team at bottom up boats hope you enjoyed our latest video demonstration where we teach you how to tie the highwayman's hitch.

0

0

0

71,540

Winner of Classic Boat magazine's Restoration of the Year Over 40 ft Award 2020, the registered UK National Historic Vessel HERON II is a beautiful 1936 Fred Shepherd design, now revived with a modern touch to meet the desires and capability of current times. https://www.sandemanyachtcompany.co.uk/yacht/726/HERON%20II She slices through the swell with “... a good turn of speed”, as reported by Uffa Fox in 'Racing, Cruising and Design', and is roomy and bright inside, with a stylish and practical living space. Inside and out she is a thoughtfully evolved classic, finished to a high standard in keeping with her original build. HERON II offers more sleeping accommodation than most #vintage #yachts of this size, lending herself to comfortable cruising and day #charter opportunities.

0

0

0

885

Video von Bluewater Sailing Catamar

0

0

0

1,865