0

0

0

0

207

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

0

0

1,145

ON LOCATION If you're looking to get out of Dubrovnik Old Town and see what lies beyond the walls! This tour is for you to show you there's so much more to Dubrovnik than just the wall. Summer or winter you can join Marko and his team at Adriatic Sunsets for a tour around Dubrovnik. Great experience. Amazing views. Entertaining commentary. Check out the entire vlog to see how our trip went: Adriatic Sunsets Tour Dubrovnik VLOG_106 - https://youtu.be/NeBkfEd-_v4 To book your tour or learn more follow the links below: https://www.adriaticsunsets.com/ Facebook: https://www.facebook.com/adriaticsunsets Instagram: https://www.instagram.com/adriaticsunsets (@adriaticsunsets) Come sailing with 45 Degrees Sailing! Check us out at: http://www.45degreessailing.com/facebook https://web.facebook.com/45degreessailing music for the video from: http://www.epidemicsound.com/ Filmed with: Sony A7III, Sony FE4/16-35, Rode Video Micro Dji Mavic 2 Pro Filmed and Edited by Nick Hathaway, 45 Degrees Sailing www.hashtagconentagency.com

0

0

0

156

The heat is on! Brand New Finnmaster T9 - launch 2021 is coming soon. Be mine T9! #finnmasterT9 #yamaha #yamahascandinavia #yamahaeurope #motorboatandyachting #premium #madeinfinland

0

0

0

1,431

0

0

0

0

1,256