Direction les Exuma 😍

Direction les Exuma !!

0

642

Nordship 39 DS https://www.scanboat.com/en/17405682

0

805

The idea behind it is that it hangs onto thin veneers that may otherwise flutter against the tablesaw blade as it reaches the end of the cut. There are other methods for cutting thin veneers which you can explore on YouTube. I find this helpful because it hangs onto the finished veneer as I tend to the billet it just came off. It is also helpful in that it is a one-fence-setting system, unlike cutting veneers off the outboard face of the blade. Of course a fresh push stick is a good idea as is a zero clearance throat plate in your saw. For most standard table saws, that is a simple project in itself. I have a pattern that allows me to make new ones easily. Subject for another video. The extended backboard allows me to fasten this jig to my Jim Tolpin style fence extension. Detail of that can be found in Jim Tolpin’s Tablesaw Magic book. A worthwhile read in its own right. You could eliminate the backboard and recess the end caps allowing f-body clamps to reach in and hold it to any tablesaw fence. I’ll leave other solutions to your own innovation. I use this jig with a Fein shop vac which has a volume control. I was surprised how low I had to turn it down to prevent the stock from locking itself firmly onto the fence, preventing me from feeding it through the blade. You may have to increase the number of saw kerfs through the front of the fence until you find the sweet spot for your vacuum. I would do it one kerf at a time. Note that the kerfs pass all the way through the fence face such that they are exposed on the ends. That is to allow the air to pass behind the stock. I hope this is useful to some of you. Happy wood butchering folks.My website: https://www.nomadboatbuilding.com Instagram: https://www.instagram.com/nomadboatbuilding/ It's not about the money but living isn't free... Products featured in this video: Buy some merch: https://www.nomadboatbuilding.com/shop/ Support these videos with monthly or annual pledges at Patreon: https://www.patreon.com/nomadboatbuilding Or make a one time donation: https://www.paypal.com/paypalme/nomadboatbuilding

0

1,145

First Class Sailing has a fleet of yachts that sail all year round. Running Royal Yachting Association practical courses on the Solent. Depending on weather, time, tide, and the course syllabus, we try to visit Newtown Creek, on the Isle of Wight. At the mouth of the Newtown River is the beautiful Newtown Creek. A large natural harbour and nature reserve. This secluded and peaceful anchorage is always a treat for our students. Bustling with wildlife there are opportunities to see birds, waders and waterfowl. If you step ashore you might even spot one of the elusive red squirrels. In this video you can see two of our fleet. Sazarac is a Beneteau Oceanis 38.1 and Fusion III is a Beneteau Oceanis 41.1. Both are extremely comfortable yachts and ideal sail-training vessels. Whether you are a newbie to sailing or are seeking advanced skills and qualifications, we have the course for you. From Competent Crew and Day Skipper to Yachtmaster we have expert instructors to ensure you learn at your pace whilst reaching the skills required of the course. To find out more head to our website or follow us on our social channels. Please do call or email if you have any questions. Website: https://www.firstclasssailing.com/ Email: info@firstclasssailing.com Call: 0203 006 3717 Facebook: https://www.facebook.com/FirstClassSailing Instagram: https://www.instagram.com/first_class_sailing Linkedin: https://www.linkedin.com/company/2262271