0

0

0

0

593

Since the founding of De Valk in 1947, our organization has been based in Loosdrecht. From this location we provide services and expertise in buying and selling yachts. Located in the center of the lakes in Loosdrecht, our location is not only in a beautiful natural area, but is also very centrally located in the urban agglomeration. With easy access to the country's major cities and waterways, Loosdrecht is the ideal location for buying or selling your yacht. More information: https://www.devalk.nl/en/offices/loosdrecht.html #devalk #devalkyachtbrokers #yachtbroker #yachtbrokerage #loosdrecht

0

0

0

599

0

0

0

0

2,642

We like spicy food, and of course, we love Indian cuisine. One of our most loved recipes is Butter Chicken, but we change it a little bit. Hit the Bell Button 🔔 to be informed when the next video comes out. Leave your comments bellow 🔽 If you like what we are doing - buy us a coffee! https://www.buymeacoffee.com/sailingk... Grab some merch http://sailingkanoa.com/spreadshirt/#!/ ... We are sailing on our catamaran, a Lagoon 380 around the world. We like to explore new places, we like to cook with people, who share their culture by showing us national recipes and tell a story. And if you like it - thumbs up👍🏼 and SUBSCRIBE to our adventure! https://www.youtube.com/channel/UC3Fd3ndXzJKxEjw79qwe3-Q?sub_confirmation=1 FOLLOW US: our daily life on Instagram @sailingkanoa: https://www.instagram.com/sailingkanoa/ our life on Facebook "Sailwithus Recipes and live on a boat": https://www.facebook.com/sailwithus our recipes on Pinterest https://www.pinterest.com/sailingkanoa/ our home page and more information about us: http://sailingkanoa.com/ Follow our boat on NOFOREIGNLAND: https://www.noforeignland.com/boat/6293528768413696 WE USE: Camera https://www.amazon.es/Xiaomi-Poco-F2-Pro-Smartphone/dp/B088HGRBHJ?th=1 Stabilization https://www.dji.com/osmo-mobile-3 #shorts #cookingonaboat #indianfood #butterchiken #videorecipe #sailingandcooking

0

0

0

1,106

1. Remove the old caulking. We use a special tool from @teakdeckingsystems. 2. If your deck is both screwed and glued, considwe removing the screws. We chose to remove the screws since they only created a possibility for water to enter the construction. 3. Fill out every screw hole with epoxy. During the renovation, we learned it would be a good idea to fill the holes with epoxy as soon as you remove the screws to ensure you seal every single hole. 4. Route between all the teak strips. We routed all the way to the gel coat to have as much wood to work with as possible. We used a fine cutter where the caulking was across the grain. 5. Seam sanding. It helps remove the remaining caulking and gives the teak a fresh bonding surface. 6. Masking the teak strips. We chose to mask the wood to reduce the sanding process later on because we knew the teak wasn’t very thick. 7. Cleaning off with acetone. This helps remove dust and gives the caulking the best conditions to adhere to the wood and cure. 8. Start caulking. We used an air compressor caulking gun. It makes the process easier for large surfaces that need caulking - we used SIS 440 from @teakdeckingsystems. We also used a 3D-printed applicator for the caulk head, which minimizes the amount of caulking used. I could only find it on @hfindustrimarineaps website. 9. “Spoon” caulk further into the seams. We used a flexible putty knife to smoothing the caulking. 10. Pull off the masking. While removing the tape, we used scissors to cut just before the area where it hadn’t been caulked yet. 11. Remove the top of the caulking. We used a sharp stanley knife. We did this to minimize sanding, just as we did with masking. 12. Sanding with grit 80. We used the fine cutter’s sanding head for all the edges and an orbital sander for the larger areas. Side note: Sanding with grit 40. We believe the best way is to sand before routing to even out the wood. Unfortunately, we had many places where the wood was so worn out that it wouldn’t have been possible to follow the old tracks with the router after sanding. #diy #sailing #sailingdiy #teak #teakdeck #sailingdenmark #boatwork #shortoftheday

0

0

0

694

Born into an aristocratic air of racy intrigue, SUMURUN’s charms have wooed a select band of suitors since her launch at Fairlie. A legend in many lifetimes, SUMURUN is one of the most exquisite of William Fife’s large ‘fast cruisers’. For almost 110 years this 94ft ketch, formerly yawl, has been in commission and loved, most recently by the current owners who treated SUMURUN to a major 2017-2019 refit at Chantier du Guip. https://www.sandemanyachtcompany.co.uk/yacht/686/SUMURUN Return to classic racing late in 2019 was triumphant, with victory at Saint-Tropez. Rigged as a bermudan ketch since 1935, this handy configuration was retained but brought subtly up to date by Juan Kouyoumdjian. Under it, SUMURUN is perhaps consistently faster than ever yet retains the ability to cross oceans comfortably; something she has quite a reputation for. “Form is temporary; class is permanent”. SUMURUN is now seriously for sale.

0

0

0

665