Dive into a world of possibilities with the Aquila 32 Sport Catamaran. Renowned for its style, practicality and performance, this streamlined and dynamic model boasts numerous distinctive features and enhancements, making it the ideal platform for aquatic adventures. The Aquila 32 Sport delivers an enhanced ride, increased comfort, and lots of space. Whether exploring captivating destinations, savoring dockside restaurants, visiting local islands, or simply relaxing and entertaining family and friends on board, the Aquila 32 Sport Catamaran promises an unparalleled experience. Disclaimer: All specifications in this presentation are provided for information only and particulars herein are obtained from sources believed to be correct, but not guaranteed. Buyers should satisfy themselves with respect to accuracy. To find out more or to talk to one of our Yacht Sales Executives, visit www.alexandermarineaust.com.au or call +61 (0)7 5618 0000.

0

0

0

537

0

0

0

0

322

Made out of a bicicle pump! The idea is to use the one way valve that every bicicle pump has on its piston, to improve the performance of the gun, instead of using loose pistons as usually. I know the difference may not be crucial but it's for the sake of well-design. The piston is too heavy but seems to prove the theory. At only 75psi it shoots a 0,2g 6mm plastic bb through a steel (yes, steel. This is Europe) coke can. Filled with water it pierces the can and leaves a mark on the other wall. Air leak detected, soon to be fixed. UPDATE 20150719 Air leak was fixed with teflon tape. Cannon was intended to be tested to 10bar / 145psi. At 8bar / 116psi the back bursted off the main body, propelling it against a wall, with the cannon hitting at a great speed. Result is a bent cannon. Speed doesn't seem to have decreased but precision has been seriously affected. Plans for now are to test the energy at 75psi (like this teaser shows), then cut the cannon to the unbent part (which is about half the lenght), glue the back permanently and test energy again at 75psi to see the relationship between cannon lenglt and muzzle energy. Afterwards, with the back end fully glued, repeat tests at 116psi / 8bar and hopefully get the same energy as full-lenght-cannon @ 75psi. If not, test pressure until total burst, or the desired energy achieved. Advise is greatly appreciated. Thanks for watching! A FewFriendsFace production Likeyright FFF2015 All likes reserved

0

0

0

247

www.voiliersideral.com

0

0

0

577

0

0

0

0

10,731