🇬🇧 Aperitifs with your feet in the water? Check ✅ Thanks to @svsnapdragon and @catamaranguru for sending in this lovely moment they shared aboard their BALI! With friends, between swims... that’s also what the Bali spirit is all about. ________ 🇫🇷 Apéro les pieds dans l’eau ? Validé ✅ Merci à @svsnapdragon et @catamaranguru pour ce joli moment de partage à bord de leur BALI ! Entre amis, entre deux baignades… c’est aussi ça, l’esprit Bali. ________ #balicatamarans #baliattitude #libertéenmer #catamaranlife #apérosurleau #momentdetente

0

0

0

139

when there's a dog walking by ....

0

0

0

7

🪢 Sunday Boat Tip [26/52] 🪢 Are you team upwind or team downwind? Linnea was our first boat with a furling headsail and the natural way for us was to head upwind. It was always a hard job, and Marcus was the only one with enough strength to be able to furl it in even though we only had a small self-tacking jib. But then we got this advice and it was a game changer! The idea seems pretty obvious now, but we had just never considered it! Now handling the furler is an easy job, that we both can manage. Hope this will be of use for your boatlife too 🫶🏼 Don’t forget to save this post and share it with a friend who needs to see this to get inspired to create their own adventure 🫶🏼

0

0

0

1,493

0

0

0

0

1,357

The servo is hooked up to the Arduino via pin 9. I've uploaded one of the example sketches you get with Arduino ISP called 'Servo Sweep'. The servo is powered by a 24 volt rough DC supply as you can see in the video. The 20mm steel boss was machined and bored out concentrically to 8.0 mm. A 5.0 mm hole was drilled in the side of the boss and tapped to take an M6 grub screw. The boss was welded into a piece of 1/8 inch steel plate to make the servo arm.

0

0

0

855

0

0

0

0

8