0

0

0

0

689

UPDATE 9/11/18 - just in from Boris Best from the upwind bouncing bam bam bam. All good here so far.Liebe grüße Tech talk: I had broken a lashing between the mast and the block for the mast rotation purchase. I left the mast rotation loose as upwind it aligns itself usually pretty nicely. This morning around 4 the boat was suddenly starting to act weirdly. I checked the wind angle display but i was upwind, although the boat was jumping over the waves and reaching at 2 knots. Heeled over a lot. I felt quickly that it was wrong with the wind instruments. I switched on the B system and find out that was broken. No surprise that the wind vane on the top of the mast was damaged after all the slamming. My heart beat rises imagining sailing the rest of the race with no instruments like in the TJV. It means a big penalty in performance. To figure out what was going on i swapped over some elements and could find that on my main system only the mast angle sensor had broken, possibly as a consequence of leaving the mast rotation open. I repaired the lashing, adjusted the mast to this upwind angle and gave the instruments a manuel input for mast angle instead of the sensor. That way my A system is now fully up and giving nice wind data again. A small issue but in the darkness and upwind - slamming is quite annoying. So happy now that i still have one functional wind vane at the top of the mast and can sail with autopilot following the wind angle… that helps a lot! To see more of Boris and his adventures check out the website at: www.borisherrmannracing.com or follow us on instagram or facebook at borisherrmannracing. We are still looking for more sponsors so if you are interested you can get in touch with us via the website.

0

0

0

183

www.mauisails.com

0

0

0

158

The slipped clove hitch is a useful modification on the standard clove hitch by finish the knot with the a bight in the working end you build a quick release into the not which makes it the perfect knot for securing your fenders to your boats rail. Follow the link below for a full demo. https://youtu.be/NZaBMuOhgWw The clove hitch Along with the bowline and the sheet bend, it is often considered one of the most important knots to know. A clove hitch is two successive half-hitches around an object. It is most effectively used as a crossing knot. It can be used as a binding knot, but is not particularly secure in that role (we prefer the constrictor knot for these use cases). A clove hitch made around the rope's own standing part is known as either two half-hitches or buntline hitch, depending on whether the turns of the clove hitch progress away from or towards the hitched object. The slipped clove hitch is one of the easiest fender knots to untie we would only recommend these for short stays or when you a remaining on the boat while docked. If you will be leaving your boat for an extended period of time the Round Turn with two Half Hitches another option to consider. If you want to learn some other skills for docking your boat why not check out our video which compares the Cleat Hitch V OXO for tying your mooring lines to fixed cleats. https://youtu.be/LepMcTJuFfI If you want to learn the other knots mentioned above check out the links below. Bowline https://youtu.be/zgTD5XD9kTM Sheet Bend https://youtu.be/vKvJ3aKu43A Constrictor Kont https://youtu.be/2Q6-T-vXEk4 Round turn with two half hitches https://youtu.be/M_W3nlil1Ko We hope you enjoyed todays Know Knots demonstration where we showed you how to tie a Clove Hitch on a bight, a great knot for securing your fenders for docking.

0

0

0

4,335

Motor boat - Både sælges, Princess V39, 2013 EUR 349.500 Scanboat https://www.scanboat.com/en/boat-market/boats/motor-boat-princess-v39-17467891

0

0

0

145

https://store.playstation.com/#!/tid=CUSA00182_00

0

0

0

12