Sur un bateau la vitesse est donnée en nœud mais c'est quoi ? Pour retrouver les autres vidéos sur le langage marin: https://www.youtube.com/playlist?list=PLvAUcpoeCcRJ_6uSoOHKem-GJtV4Tbyyr Pour soutenir la chaine et notre travail: plateforme Utip : https://utip.io/latitudenomade/home

0

0

0

9,412

Which Version do you like better? B&W or Color? Both were edited from the same color original. The video was shot with the ambient light in the Manor (it was pretty dim), with our Nikon D7000 camera at 1080p24.

0

0

0

86

Schön, dass du hier bist! Wir, Emely und Tjark, haben uns den Traum vom eigenen Segelboot erfüllt, eine Maxi84, relativ spontan und ohne das ganz große Geld. Das Boot müssen wir noch umtaufen auf den Namen Meera. Wir nehmen dich mit auf unsere Reise von blutigen Anfängern zu hoffentlich passablen Seglern. Bevor wir uns in die Wellen stürzen können, liegt noch ein Berg an Arbeit vor uns. Umbauten, Änderungen und vor allem der Sportbootführerschein müssen erledigt werden. Außerdem müssen wir noch lernen richtig zu segeln. Du kannst dich also schon auf die nächsten Videos freuen! Bei Instagram findest du immer die aktuellsten Infos: https://www.instagram.com/sailingmeera/ Ahoi und viel Spaß mit dem Video ⛵🌊 LIZENZEN/ RECHTLICHES • Musik: https://www.bensound.com/ • Mixkit Stock Music Free License

0

0

0

1,012

Screwhead teak plugs in 23 seconds!! Having just replaced around 1000 teak screw head plugs…this was the process.. Unscrew every exposed screw: I used a battery drill driver. Drill the hole deeper: I used a 10mm forstner bit as it fitted the existing holes perfectly and did a tidy job. This is subject to having enough teak left to drill deeper. Fortunately Najad were generous with their teak! Try not to drill as far as the fibreglass. Add sealant and replace the screws: I’ve seen videos where they say the screws were just for construction and you can leave them out. That is probably correct but I’m going for better safe than sorry. If the teak was thinner with no room to drill deeper and replace the screws I’d leave them out as a last chance of getting a few more years out of a worn deck. Sealant to stop any water getting into the deck core. I used a hand screwdriver rather than power to replace them as power was tending to rip out the self tapping screws from the fibreglass. Put glue on the plug: I used a polyurethane foaming wood glue. Epoxy would be very strong but mixing all the batches a big pain if you have lots to do. Try to get more glue on the edges than the base of the plug as I had a couple of plugs pushed out as the glue foamed up. Tap in the plug: I used a standard claw hammer as it’s all I had but I daresay a wooden mallet is recommended but the top of the plug is waste material anyway so it matters not. Cut off the excess: I used a Fein multi tool oscillating saw. Be careful with your angle as you don’t want to gouge the surrounding deck. It took me a few goes to master the technique but was pretty quick when I did. I said the top of the plugs were waste but if you found yourself short a lot of them had enough material left to do more holes. Sand flat: I used a random orbit sander with a worn 80 grit pad. I now have fresh patches all over the deck so, once I’ve completed a couple of caulking touch ups, I’ll give the whole deck a very light sanding. You could just leave the newly sanded plug patches to grey down to match the deck if you preferred. And that’s it…repeat many times! Feel free to ask any questions 😊⛵️ #boatlife #liveaboardsailboat #boatmaintenance #najad #boatrepairs

0

0

0

708

One of the many things I love about this adventure lifestyle and simple living on a sailboat is that I can completely flip my day around. I just have to slip a few lines and cast off from the dock. The path to here wasn't easy, but was it ever worth it. This adventure is just getting started. You're going to want to subscribe. We've got plans! Join this channel to get access to perks: https://www.youtube.com/channel/UCG6diCN-nm_nUS-BS-hJHTA/join

0

0

0

668