close

Welcome aboard to the our video site for sailors. We are being constantly blasted by scammers and pirates, so registration is  invite only


contact@sailorsahoy.com with "Invite". No spam, no newsletters. Just a free account

Shorts Create

Final minutes of Loni & Eric's wedding in Sun Peaks. Beautiful day, beautiful people!

mikegritten

0

0

67

Celebrating 40 years of Lagoon Catamarans! Here's a quick 1 minute run-through of their entire range of sailing yachts. ▫️ All new Lagoons now come with Uvoji UV purified water systems. Pretty cool - there's now no need to store plastic water bottle packs on board a Lagoon. Healthy water straight from the tap! ▫️ #fresh #water #sailing #40years #travel @LagoonCatamarans1984 ▫️ 📷 Nicolas Claris

Katamaranscom

0

0

654

A surprising secret from South Africa: cayenne pepper mixed into antifouling paint. This boat stayed clean for a year, even after 7 months stationary. See if it works! #Antifouling #BoatLife #SailingTips #MarineMaintenance

sv_goat

0

0

0

Made out of a bicicle pump! The idea is to use the one way valve that every bicicle pump has on its piston, to improve the performance of the gun, instead of using loose pistons as usually. I know the difference may not be crucial but it's for the sake of well-design. The piston is too heavy but seems to prove the theory. At only 75psi it shoots a 0,2g 6mm plastic bb through a steel (yes, steel. This is Europe) coke can. Filled with water it pierces the can and leaves a mark on the other wall. Air leak detected, soon to be fixed. UPDATE 20150719 Air leak was fixed with teflon tape. Cannon was intended to be tested to 10bar / 145psi. At 8bar / 116psi the back bursted off the main body, propelling it against a wall, with the cannon hitting at a great speed. Result is a bent cannon. Speed doesn't seem to have decreased but precision has been seriously affected. Plans for now are to test the energy at 75psi (like this teaser shows), then cut the cannon to the unbent part (which is about half the lenght), glue the back permanently and test energy again at 75psi to see the relationship between cannon lenglt and muzzle energy. Afterwards, with the back end fully glued, repeat tests at 116psi / 8bar and hopefully get the same energy as full-lenght-cannon @ 75psi. If not, test pressure until total burst, or the desired energy achieved. Advise is greatly appreciated. Thanks for watching! A FewFriendsFace production Likeyright FFF2015 All likes reserved

donotpushhere

0

0

250

Our cute little reindeer runs wild on the beach. Vinted is such a great place to find. Adora dog outfits. She brings us Christmas cheer, so we thought we would share it with you all. 🎄

sailingseagullsouth

0

0

74

0

sculatipartners9057

0

0

78