Drilling Holes in the Deck and the Hull for Head Fittings on an Alberg 30 - Part 4

Finally wrapping up this four part series on my head build out! In this episode I measure and drill out the deck fitting and the hole for the vent in the hole on my Alberg 30. Boats of this age do not have a cored hull so the beauty is you don't need to seal the core on the vent hole because the entire hull is solid hand laid fiberglass!

I make my project videos on the slow side letting people see what I did and how I dealt with obstacles, in past videos my viewers have thanked me for not jumping over all of the details and getting right to the finished project so while this might not be the most exciting video it might help some people out there see how I dealt with certain aspects of the project.

Thanks for watching!

fair winds,
Sailor James

patreon: https://www.patreon.com/sailorjames
website: http://svtriteia.com
insta: https://www.instagram.com/james.the.sailor.man