Did you know our boats don't have a hull-to-deck joint? We don't make our yachts like other manufacturers, we make them better, stronger, and to last longer. One of the ways we distinguish our yachts from the mass-produced yachts is the way we join the hull to the deck. Some manufacturers bond the hull to the deck with structural adhesive, some bond and use screws, some bond and bolt. We are one of a few manufacturers who bond and then laminate the deck to the hull. Doing this makes the hull stronger; the hull and the deck become a single, strong structure. It is easier and quicker to fit the interior of a yacht before the deck is attached, but doing this means that the deck will have to be joined with the bulkheads and some of the interior in place - this makes the join harder to access. We join the hull and deck as one of the first parts of the build process; the whole join can be laminated and we know there will be no voids. We then build our yachts with the deck attached; everything for the interior - the bulkheads, every item you see in the interior, including the engine - comes through the companionway or the roof in the deck saloon. #WeAreSirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

0

0

0

4,254

We varnish by hand. We let our craftsmen use their skill and their eyes to decide when the wood used in the interior has enough varnish. Many companies use varnishing machines that spray thin layers of varnish onto the wood; often before the wood is assembled into the finished part. By applying vanish by hand we get a thicker, more hard-wearing finish on our wooden surfaced. By varnishing after units are assembled the wood is completely sealed and moisture has nowhere to enter the wood. Our bulkheads are varnished only once they have been laminated in the boat. This fully seals the wood, to ensure a tough finish for years to come. It's more work to varnish in this way, but we don't compromise on quality. #WeAreSirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

0

0

0

3,149

At Sirius, we build our yachts to last you many decades. With longevity comes maintenance and repairs. Our yachts are built with ease of ownership in mind, and this is why, if you need to remove a hidden deck fitting we've attached, there will be GRP packing around the nuts below the deck. Not only does this prevent any ingress of water around the fitting, it means that any bolt or machine screw can be removed and replaced on your own, and without having to remove any of the interior. Anyone who has unscrewed a bolt, and heard the tell-tale clatter of a nut falling off, will know the sinking realisation that a quick job has now become a long job. The headlining and possibly parts of the interior will need to be removed to access the bolt. We never want that to happen to you. There may be times when deck fittings need to be repaired or replaced. But on a Sirius, we've tried to make this as painless for you as possible. #WeAreSirius #SiriusWerft #Sirius #siriusyachts #Yacht #Yachting #Sailing #Sailboat #Decksaloon #decksalon #BluewaterCruiser #OffshoreCruiser #LiftingKeel #Twinkeel #BilgeKeel #Handbuilt #Sailingyacht #Sailingboat #BlueWaterSailing #GoAnywhereCruiser #Swingkeel #OceanSailing #Circumnavigation #DreamYacht #Segeln #SailingLife #SailingLifeStyle #LiveABoard #SailingInstagram #YachtingWorld

0

0

0

3,501