Volgende

Looking Like a Mold & NOT a Kit - Spraying Gelcoat (MJ Sailing - Ep 302)

43,345 Bekeken· 16/09/23
Mjsailing
0

Our hull has come to us in dozens of pieces, but it's time to make it look like a factory mold. Focusing our attention on the transom area of the boat, we go through all the steps to blend the seams together, after we had initially bonded them with methacrylate and glassed from the inside. To continue work on the exterior, first the gelcoat would need to be removed from a few inches on each side. Any gaps in the seam were then filled with a thickened resin that had extra chop strand fiberglass in it. A piece of 12 oz double biased fiberglass was laid out, and after curing overnight, was sanded. The surface was then covered with our white polyester fairing compound, and worked so that all of the surfaces were flush. Then, it was time to apply gelcoat!! It's recommended that five coats of 5mm thickness go on, and each new coat goes on after a flash of the first. We did have to deal with some unexpected rain and humidity, but we think overall the project was a success!! We hope you enjoy. Link to our boat: https://maxcruisemarine.com/max42sc-s... Thank you SO MUCH to our Patrons. These amazing supporters help keep us on the boat, our camera equipment up to date, and the videos coming. Without our patrons, these videos would not be possible. To join the Patreon ranks, please visit http://www.patreon.com/mjsailing or Buy us a beer through PayPal! https://www.paypal.me/MJSailing or Help contribute to the build by shopping our Amazon Wish List! For the build: https://www.amazon.com/hz/wishlist/ls... For the boat: https://www.amazon.com/hz/wishlist/ls... Delivery address: Kentmorr Marina 910 Kentmorr Road Stevensville, MD 21666 Thank you!, Matt & Jessica Videos made by Jessica, featuring Matt and Georgie. 00:00 - DOZENS of seams to fill on our boat 00:57 - Removing gelcoat from transom seams 02:55 - Getting in the cracks with a grinder 04:52 - Filling with thickened resin & glassing 07:54 - Sanding down and fairing 10:45 - Applying first layer of gelcoat 13:11 - We need 5x 5mm coats 14:47 - Unexpected thunderstorm. :/ 16:56 - How'd it turn out? 17:41 - Closing Music: Beck and Call - Torii Wolf Bright Red Lights - Coma Svensson Golden Crates - Dusty Decks More Than You Can Chew - Rockin' for Decades Overcoming - Cospe Pandemonium (Tribute Version) - The Mondays -- Get Our Merchandise: https://mj-sailing.myshopify.com/ :)

Laat meer zien

 0 Comments sort   Sorteer op


Facebook Reacties

Volgende